Sena
10CEVO01
10C EVO Motorcycle Bluetooth Camera & Communication System with HD Speakers
Features:
Specifications:
general:
intercom:
Optical data:
Video:
Battery:
Wifi:
Bluetooth:
Audio:
Photo:
Time-lapse mode:
External memory:
Contents:
- a compact design
- a new camera with 4K/30FPS
- video tagging
- Smart Audio Mix™
- 4-way Bluetooth Intercom (range up to 1.6 km)
- Bluetooth connections to listen to navigation announcements, make calls and listen to music
- Bluetooth 4.1
- slim Design
- Ultra HD (4K at 30 fps)
- voice announcements
- Smart Audio Mix™
- Advanced Noise Control
- HD Voice
- compatible with remote control
Specifications:
general:
- operating temperature: -10°C - 55°C
- dimensions: main module: 95 x 59 x 31 mm / loudspeaker: 36 mm, thickness 6.5 mm / cable length between loudspeakers: 555 mm / length of boom microphone: 190 mm
- weight main module: 90 g
intercom:
- range: Bluetooth intercom: up to 1.6 km (in open country)
- supports up to 4 drivers
Optical data:
- camera angle: 125°.
- aperture: f/2.4
- lens rotation: 30°.
Video:
- 2160 p: 30 fps (Ultra HD)
- 1440 p: 30 fps (Quad HD)
- 1080 p: 60 fps (Full HD)
- 1080 p: 30 fps (Full HD)
- recording time: 1.5 hours
- file format: MP4 (H.264)
- maximum video bit rate: 60 Mb/s (4K)
Battery:
- talk time: 20 hours
- charging time: 2.5 hours
- lithium polymer battery
Wifi:
- IEEE 802.11 b/g/n/a
- range: 15 m
Bluetooth:
- Bluetooth 4.1
- headset Profile (HSP)
- hands-free profile (HFP)
- extended audio output profile (A2DP)
- profile for remote control of audio or video ▪devices (AVRCP)
Audio:
- noise reduction: Advanced Noise Control™
- codec: Built-in SBC Codec
- FM radio (radio frequency data: 76 ~ 108 MHz / 10 station presets)
- HD Voice activates high quality audio telephone conversations
Photo:
- 12MP (4:3)
- continuous shooting: 8 frames per second
Time-lapse mode:
- one recording every second or every 2, 5 or 10 seconds
External memory:
- MicroSD card (U3 or higher) up to 128 GB (not included)
Contents:
- 1 x Sena headunit
- 1 x clamp unit
- 1 x clamp unit (gear type)
- 1 x glued surface mounting adapter
- 1 x glued surface mounting plate
- 1 pair of speakers
- 1 x wired boom microphone
- 1 x wired microphone
- 1 x microphone sponge for boom microphone
- 1 x microphone sponge for wired microphone
- 1 pair of hook and loop fasteners for speakers
- 1 pair of foam speaker covers
- 1 pair of hook and loop fasteners for speaker covers
- 1 x holder for boom microphone
- 1 x hook and loop fastener for Boom microphone
- 1 x hook and loop fastener for holder
- 1 x hook and loop fastener for wired microphone
- 1 pair of speaker pads (thick)
- 1 pair of speaker pads (thin)
- 1 x allen wrench
- 1 x USB power/data cable